What is the maximum speed of DDR2 RAM?

DDR2 Specs

What is DDR2 SODIMM?

What is the difference between DDR, DDR2, DIMM, SODIMM, and MicroDIMM memory modules? The DDR2 is essentially an upgraded version of the DDR standard that allows for memory modules with lower power consumption, greater heat dissipation, increased speed capabilities, larger memory capacities, and increased performance.

How many pins does a DDR2 SO DIMM module have?

200-pin SO-DIMMs (DDR SDRAM or DDR2 SDRAM) have a single notch nearer to one side. The exact location of this notch varies (read below).

What DDR2 800?

DDR2 PC2-6400 (commonly referred to as DDR2-800) memory is DDR2 designed for use in systems with a 400MHz front-side bus (providing an 800MT/s data transfer rate). The “6400” refers to the module’s bandwidth (the maximum amount of data it can transfer each second), which is 6400MB/s, or 6.4GB/s.

Which RAM speed is best?

How fast should RAM be for a gaming PC? Generally, we’d recommend you stick with two DDR4 modules for a dual-channel build, each with a minimum of 3,000MHz clock speed. That should ensure you’re getting the most out of the best CPUs for gaming.

Is Sdram same as Sodimm?

Unless you’re a tech enthusiast, it’s hard to maintain much interest in the differences between computer memory standards. In truth, the RAM used by almost all modern computers is SDRAM. SODIMMs are simply a small version of the standard RAM stick.

What is the speed difference between DDR2 667 and DDR2 800?

DDR2 667 (PC2-5300) = 5.3GB/sec in single channel 10.6GB/sec in dual channel DDR2 800 (PC2-6400) = 12.8GB/sec in single channel 12.8GB/sec in dual channel With respect to dual channel comparison, its a 133MHz difference which translates into 2.2GB/sec gain from upgrading to 800MHz

What is the data transfer rate of the ddr2-6400?

According to a data transfer rate of a comparison table I found on the web DDR2 667 (PC2-5300) = 5.3GB/sec in single channel 10.6GB/sec in dual channel DDR2 800 (PC2-6400) = 12.8GB/sec in single channel 12.8GB/sec in dual channel

Can my computer take 800 MHz RAM?

According to crucial.com, the types of memory your computer can take is PC2-5300 and PC2-6400. That would be 667 Mhz and 800 Mhz. So the answer to your question would be yes, your computer can take 800 Mhz RAM. If you mix 667 Mhz and 800 Mhz RAM together, all RAM will go at speed 667 Mhz.

Can the DS3 run DDR2-800 with the FSB?

If you change the memory ratio to 2:3 (an advanced setting via Ctrl+F1 iirc) you can run DDR2-800 synchronously with the FSB (but some argue that this ratio leads to unsatisfactory performance increase. I think n7 did a thread about it a while ago). The gigabyte DS3 has the ability run memory at DDR2-800, that’s what it means by that.