What is colorbond barge capping?

Barge Capping provides an aesthetically appealing finish and provides a watertight seal on gable roof ends. Barge Capping is commonly used on all roofing profiles and is a high quality, durable and cost effective way to give your roof an attractive finish. Made from COLORBOND®, ZINCALUME® or GALVANISED steel.

Do you have to scribe ridge capping?

Here’s one of the VPR boys giving us a quick demo of ‘Scribing’ – the process of cutting the ridge capping to suit the profile of the roof sheets to prevent wind driven rain from entering the roof under the flashings. It’s a requirement for all roofs in. It’s a requirement for all roofs in Queensland!

What is roof barge?

Bargeboards refer to the fascias located at the gable end or side of a roof. Used to protect the roof timbers of a building, bargeboards can also have a significant impact on the general aesthetics of the exterior of your property.

What is barge Moulding?

Barge Mould – Zincalume – 2.4 Mtr (6Ft) This ridge capping is a roofing flashing which is used to finish off any gable roof and adds an attractive finish to your roof’s ridge line. Ridge Capping is essentially used on domestic buildings with corrugated COLORBOND® Steel roof sheets.

How is TrIMdEk fixed?

TrIMdEk profile is pierce-fixed to timber or steel supports. This means that fastener screws pass through the sheeting. you can place screws for LySAGhT TrIMdEk through the crests or in the pans. To maximise watertightness, always place roof screws through the crests.

Where can I get barge capping for my roof?

Contact us for pricing and further details today. Stratco offers several different styles of Barge Capping to complete the edge of your roofing. Square Barges provide a neat finish and can be ordered in a variety of sizes to fit any style of roof sheeting.

What are the different styles of barge capping?

Stratco offers several different styles of Barge Capping to complete the edge of your roofing. Square Barges provide a neat finish and can be ordered in a variety of sizes to fit any style of roof sheeting. Roll barges have a curved edge that creates a traditional form that blends with corrugated sheeting.

How do you attach barge capping to a carport?

Only the front and two sides of the carport require the attachment of barge capping. The rear has the gutter attached. Fix the side barge capping first. Position capping flush with the front of the roof sheets and fasten through the top crest of the roof sheets using rivets at 500mm centres (Figure 7.0).

What is rollroll barge capping?

Roll Barge Capping has an attractive curved edge that blends corrugated roofing. Whether you want to install it yourself or require assistance, we are here to help. Contact us for pricing and further details today.