How do I reset my HP OfficeJet 4500?

1. Unplug the power cord from the HP All-in-One.
2. Wait for 20 seconds.
3. Press and hold # and 6 while plugging in the power cord to the HP All-in-One.
4. Release the buttons after the HP All-in-One starts up.
5. The HP All-in-One will now be reset to factory defaults.

What cartridge does HP 4500 take?

HP 901
Your HP OfficeJet 4500 printer is designed to work with original HP 901 and HP 901XL ink cartridges.

How do I change the ink cartridge on my HP OfficeJet 4500?

Step 2: Replace the ink cartridges

1. Turn on the printer.
2. Open the front access door.
3. Wait until the carriage is idle and silent before you continue.
4. Lightly press down on the ink cartridge to release it, and then pull the ink cartridge out of its slot.
5. Remove one of the new ink cartridges from its packaging.

How do I get my HP OfficeJet 4500 to scan?

GO to the HP solutions center icon that is on your computer, click on that, go to scan picture or document, whichever it is that you are trying to scan, and all the options for scanning will come up and you will be able to scan without problems.

How do I setup my HP Officejet 4500 Wireless?

To connect to a wireless network.

1. Press the button on the far right with a wrench symbol.
2. Use the right arrow key by the OK button to go to the wireless menu and press the OK button.
3. You will see Setup Wizard.
4. Press OK.
5. It will search for wifi in the area.

How do I get my HP Officejet 4500 wireless to scan?

1. Use the printer control panel ->Scan, if this option doesn’t work, then.
2. From PC, launch the Start->Program files ->HP ->Printer Model-> solution center and slect Scan for scanning.
3. Any third party applications like Paint progrm, click file and choose insert the image from scanner.

How do I setup my HP OfficeJet 4500 wireless?

2) Install the printer via USB and then go back into the software package, there will be an option to convert the usb to wireless. The USB cable is used to send the network information and then you can disconnect the cable. Let me know how this goes for you!