How do I remove my Netatmo camera?

Smart Outdoor Camera with and without Siren

1. Smart Outdoor Camera with Siren.
2. Setup – Installation.
3. Storage (SD card – Dropbox – FTP)
4. Apple HomeKit.

Where to mount Netatmo Rain Gauge?

Location. The Smart Rain Gauge should be placed horizontally, if possible 50 to 150 cm above the ground, and at a distance equal to the height of the surrounding obstacles (by default 3m).

How does Netatmo weather station connect to HomeKit?

Once the Station is installed, to activate HomeKit on your Weather Station, open the Netatmo Weather app on an iPhone or iPad / iPod touch:

1. Go to Settings> Manage my Home.
2. Select the room where the Main Station module is located.
3. Click on the main module.
4. Click on “Configure HomeKit”.

How do I reset my Netatmo outdoor module?

Power Specifications

1. Disconnect and reconnect your indoor module. Check that the LED flashes 3 times.
2. Force quit and restart the Netatmo Weather application on your smartphone. The Station can take up to 10 minutes to reconnect.

How do I connect my Netatmo presence to WIFI?

Steps

1. Reboot your router and your smartphone.
2. Reboot the Camera (at the fuse).
3. Open the Netatmo Security App and from the settings choose “Install new products”.
4. If you are using an iOS device, be sure your smartphone is connected to a 2.4GHz network.
5. If you try to install the Camera on a Wi-Fi repeater:

How do I reset my Netatmo presence?

Go to phone Settings > Applications ( Apps ) > Presence > Clear data.

How do you mount a Netatmo wind gauge?

It is recommended to place it about 1 m / 4 ft. above the top of your roof. The Wind Gauge should be placed horizontally and the arrow (there’s one at on the top and one in the bottom) must be pointing to the North. You can use your smartphone’s compass app to check that when you install your Wind Gauge at home.

How does Netatmo rain gauge work?

1.1 How does it all work? The outdoor module (small) wirelessly sends its measurements to the indoor module (large) using a radio signal. Using your Wi-Fi access point, the indoor module then sends both its own measurements and the outdoor module’s measurements to your personal online Netatmo account.

How do I reset my Netatmo weather station?

To reset:

1. Plug the Relay into a 230V socket using the mains adapter or boiler adapter. The LED should blink five times then go out.
2. Press and hold the Relay button for 20 seconds. For the first 15 seconds, the LED will blink slowly (glow).

How does the Netatmo Outdoor Camera Work?

For people, cars and animals, the Camera records a Full HD 1080p video and sends an alert straight to your phone via the Netatmo app thanks to its wireless internet connection (Wi-Fi). All the videos can be viewed on this mobile app, where you can also watch the Outdoor Camera with Siren “Live”. What is the smart floodlight?

Can I connect multiple outdoor modules to one Netatmo weather station?

The Outdoor Module works only as a replacement to an old Outdoor Module sold with the Weather Station. You cannot connect multiple outdoor Modules to one Netatmo Weather Station.

Is my data secure with Netatmo?

Your data are secure and only you can access them. This local storage is completely free (the microSD card is included in the price of the Netatmo Cameras). If you want, you can also send your videos to your Dropbox account or an FTP server. Do you have more questions? See the Frequently Asked Questions